Freestanding outdoor gas heater with a cylindrical heating tower and protective mesh. The gas cylinder fits inside the base. For gardens, balconies, restaurants and cafés. Outdoor use only.
Freestanding outdoor gas heater with a mushroom-shaped reflector that spreads heat all around. The gas cylinder fits inside the base. For gardens, balconies, restaurants and cafés. Outdoor use only.
Freestanding pyramid-shaped outdoor gas heater with a visible flame column behind a protective mesh. The gas cylinder fits inside the base, with wheels for easy moving. For gardens, restaurants and cafés. Outdoor use only.
Diaphragm gas meter for homes, model GAOLI G1.6A. Connections: 3/4" male thread on inlet and outlet. For low pressure only (max 200 mbar): install after the regulator, never on the high-pressure line. Max flow 1.5 m³/h (1500 L/h), working pressure 5 to 200 mbar, cyclic volume 0.9 dm³, accuracy class 1.5, OIML R137 approved, operating temperature -10°C to +40°C.
Pressure gauge with a 0 to 10 bar scale, black steel case and bottom 1/4" brass male thread connection. Used for testing and checking pressure in gas installations.
Bag of 50 grey plastic double pipe clamps for two 20 mm pipes side by side, with a built-in wall plug. Push into a drilled hole to fix both pipes to the wall.
VALUE hand lever tube expander for soft copper pipe. Widens the pipe end so another pipe of the same size fits inside for a brazed joint, without a coupling. Sizes 1/4" to 7/8" (6 to 22 mm).
Compact VALUE tube cutter for copper and aluminium pipe from 1/8" to 3/4" (4 to 19 mm). Small body for tight spaces, with a steel cutting wheel and guide rollers.
VALUE flaring tool set in a hard carry case: flaring tool with flaring bar for 45° flares on soft copper pipe from 1/4" to 3/4". Suitable for R410A systems.
VALUE eccentric flaring tool for making 45° flares on soft copper pipe, sizes 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4". The eccentric cone gives smooth, even flares that seal reliably with flare nuts.
VALUE lever tube bender for soft copper pipe 1/2" (12.7 mm). Bends from 0° to 180° with a twin roller design that reduces friction and keeps the pipe round.
VALUE lever tube bender for soft copper pipe 3/8" (10 mm). Bends from 0° to 180° with a twin roller design that reduces friction and keeps the pipe round.
Brass gas ball valve with shut-off lever. 1/2" NPT male thread on one end and 1/2" flare with nut on the other, with a wall bracket. Tested at 8 bar, max working temperature 80°C. For LPG and natural gas.